Phone:
(701)814-6992
Physical address:
6296 Donnelly Plaza
Ratkeville, Bahamas.

Common exterior wall coating problems include efflorescence, peeling, cracking, visible color differences, aggregate loss, insufficient weather resistance and poor thermal insulation performance.
These problems are often related to inadequate substrate preparation, unsuitable temperature or humidity, incorrect material ratios, uneven application or failure to follow the specified coating system.
Before application, the substrate should be clean, dry, stable and free from dust, oil, loose material and excessive alkalinity. Primers, intermediate coats and topcoats should be applied according to the recommended coverage rate, drying time and environmental conditions.
We provide application guidance covering substrate preparation, material ratios, spraying or roller application and recommended temperature and humidity. Project-specific recommendations are also available for aged walls, coastal buildings and high-humidity environments.
When applied as a complete system with the recommended primer, stone-effect coating and protective topcoat, high-quality real stone paint and water-in-sand multicolor coatings can provide an expected service life of approximately 8 to 15 years under standard outdoor conditions.
Actual service life depends on substrate condition, coating thickness, application quality, climate, UV exposure, rainfall and routine maintenance. Correct substrate treatment and the use of a compatible coating system are essential to long-term performance.
For coastal, rainy or high-temperature environments, the protective coating system and application thickness can be adjusted to improve resistance to fading, chalking, delamination, water penetration and aggregate loss.
Proper substrate preparation, compatible coating layers and standardized application procedures are essential to achieving a durable and consistent exterior wall finish.